Michael Myers Door Hanger- SVG only

This is a digital file only not a physical product. The file was tested using a glowforge pro but the passthrough slot is not needed. The design is made for an 18 in round which I purchase else where. 

WHAT YOU WILL NEED

-18in door round

-2 sheets of baltic birch or your choice of material. I personally used 1/4 in

-3m adhesive or glue

-Paint or Paint markers

-Ribbon

PUTTING IT ALL TOGETHER

For the door hanger pictured I spray painted my 18in round with white spray paint and after it dried I used a paint brush to flick red paint on to give the appearance of blood splatter. I spray painted Michael Myers and then used paint markers to paint the knife and vinyl for the lettering. You could always use wood pieces for the lettering but I like the appearance of a mixing the two together. 

Once everything is dry I pealed off the 3m backing and adhered everything in place. 

The bow was made using 2.5 in ribbon from Hobby Lobby that I made using a bowdabra. If you don't already have a bowdabra I highly suggest purchasing one! They are great for those who are bow challanged!

I attached the bow using a staple gun and added the ribbon to the back with the staple gun as well. 

HOW TO USE THIS FILE

You may use this file to make items for both personal or commercial use. You may not however distribute, share, upload or sell this file as your own. 

If you have any questions please do not hesitate to message me! 

riddickulousdesigns@gmail.com